Transparent and hygro-hardening protective product, ideal for substrates subject to abrasion indoors. Scratch-proof, available in glossy or satin version.

Technical Qualities
IGROLUX by OIKOS is a special, low environmental impact, transparent, protective glaze which hardens once in contact with air. It is ideal for interior surfaces that are subject to abrasion it is available in gloss and satin finishes and conforms to the norms D.I.N 53 754, D.I.N 54 004 etc. It is odourless, non-toxic, non flammable and environmentally friendly.

Ideal Use
As a protective glaze for interior, decorative products and surfaces in  general.

Surface Preparation
Thoroughly clean the surface to be varnished and, if possible, rub down using very fine sand paper.

Application Method
Using a roller or brush, apply two coats of IGROLUX by OIKOS undiluted, leaving approximately sic hours between coats. It is also possible to apply the product by spray gun after having diluted it with maximum 10% drinkable water. It is recommended to rub down the surface with very fine sandpaper between coats. In case of walls that are subject to continual abrasion, it is recommended to apply a third coat of the product.

Toxicological Data
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The  product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.