Anti-condensation paint containing hollow glass microspheres that act as insulation and are able to therefore reduce the temperature difference between interior and exterior and as such contributing in preventing the formation of moulds and algae and in relative terms to energy saving. It maintains the vapour permeability of the wall and keeps it warm. Available in 116 shades. Product certified in class “A+” under emissions classifications (Decree of the Official French Gazzette dated 19th April 2011).

Ideal Use

Interior walls with problems of condensation, north facing walls and walls with little exposure to the sun.

Surface Preparation

Prepare the surface by removing all exisiting mould and algae using the indicated detergent STERYIFIX by OIKOS and with the sanifying primer STERYLSAN by OIKOS.

Application Method

The application method for MICOTRAL varies according to the effect desired. 

Smooth finish: apply by brush or roller a first coat of MICROTRAL diluted 25 – 30% with drinkable water. After 6 – 8 hours, apply the second coat of the product diluted 20 – 25% with drinkable water.

Orange peel finish: apply a coat of the product diluted 20 – 25% with drinkable water. After 6 – 8 hours apply by roller, a second coat of the product undiluted.

Safety Information

The product does not contain any heavy metals such as Chrome or Lead nor does it contain any toxic solvents, aromas and chlorate. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications 

Clean the surface to be treated by removing any loose or flaking material. Remove all mould and algae using a detergent such as STERYLFIX by OIKOS and a sanifying primer such as STERYLSAN by OIKOS. Apply two coats of an anti – condensation paint in class A+ under emissions classification such as MICOTRAL by OIKOS.