Water-based emulsion with high-penetration ability, based on nanomolecular structure, designed to protect porous surfaces from moisture and salt stains and prevent fungi-mold growth. After drying, it is transparent. It does not become yellow due to UV radiation and allows the structure to breathe. It does not form a skin on the application surface and does not alter its appearance. Certified according to EN 1504-2 and classified as hydrophobic impregnation. E marked. 
NANOPRO-C is used to protect porous substrates such as concrete, masonry, plaster, tile grouts, gypsum boards, chipboards, natural stone, etc. from moisture and salt stains. Suitable for indoor and outdoor applications.

Substrate 
The surface to be primed must be dry and free of dust, grease, dirt, etc.

Application
NANOPRO-C is thoroughly stirred and uniformly applied to the substrate by brush, roller or spray until full impregnation. For very porous substrates a second layer might be required, which is applied within 3 hours after the first one. Total resistance in absorbing moisture is achieved 2 days after the application.