Mineral paint based on seasoned lime putty with a smooth matt effect. Thanks to its high alkalinity and excellent perspiration, it has a bacteriostatic effect preventing the development of mold and bacterial agents. The product gives the surfaces the warm touch typical of the ancient “antique effect” processes obtained with lime products.

Description
Mineral paint formulated with mature lime putty, with smooth, mat effect. Its high level of alkalinity and its excellent vapour permeability give the paint a bacteriostatic action thus preventing the development of mould and bacteria. The product confers to the wall a warm appearance with tones of colour typical of the ancient decorations made with lime products. Formaldehyde-free. 

Ideal Use
Exterior and interior walls of historical or prestigious buildings.

Surface Preparation
The surface must be dry and mature, new plasters should be left to mature for at least 30 days to allow complete carbonation of the support. Carefully brush or strip the surfaces and remove loose and flaking material. In case of restoration work, water infiltrations and leakages must be repaired. For the best results, it is recommended to apply the product directly on lime plasters or on existing coatings of lime paint once they have been carefully washed and brushed clean. Only if really necessary, CONSOLIDANTE CALCE correctly diluted, can be used to consolidate very absorbent or powdering surfaces. On interior surfaces it is possible to apply the product on to already painted surfaces only after having carefully evaluated the adhesion of the product. Paints with low absorption levels should be sanded down to increase porosity and facilitate the adhesion of the product however if this is not sufficient, screed the surface with RASATURA  ALLA CALCE.

Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is classified as hazardous pursuant to the provisions set forth in the Regulations (CE) 1272/2008 and subsequent amendments and supplements. For further information see the product Safety Data Sheet. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil, etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
The surface must be dry and mature, new plasters should be left to mature for at least 30 days to allow complete carbonation of the support. Carefully or strip the surface and remove loose and flaking material. In case of restoration work, water infiltrations and leakages must be repaired. For the best results, it is recommended to apply the product directly on lime plasters or on existing necessary, CONSOLIDANTE CALCE by OIKOS correctly diluted, can be used to consolidate very absorbent or powdering surfaces. On interior surfaces it is possible to apply the product on to already painted surfaces only after heaving carefully evaluated the adhesion of the product. Paints with low absorption levels should be sanded down to increase porosity and facilitate the adhesion of the product however if this is not sufficient, screed the surface with RASATURA ALLA CALCE by OIKOS. Apply a mineral paint formulated with mature lime putty with smooth, mat effect in Class A+ under Emissions Classification such as PITTURA ALLA CALCE VERONA.