PLANFIX

PLANFIX is a polymer-modified, cement-based, fine-grained powder filler, for indoor or outdoor applications. With the addition of water a paste with very good workability is formed, suitable for filling. Certified according to EN 1504-3 and classified as a PCC R2 type mortar for concrete repairs. CE marked. PLANFIX has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-06173, The International EPD System.

  • Smoothing and repairing of exposed concrete.
  • Filling of cracks, pores or cavities in concrete surfaces.
  • Full-surface smoothing (stuccoing) with very thin layers instead of plastering or cement mortar application.

Substrate
The substrate must be stable and free of dust, grease, loose material, etc. Prior to application of PLANFIX, the surface should be thoroughly dampened. 

Application
PLANFIX is slowly added to a clean container with water – 3 parts PLANFIX to 1 part water by volume – under continuous stirring until a uniform, pasty putty is formed.

  • Temperature during application should range between +5 oC and +30 oC.
  • In hot weather, PLANFIX should be dampened after application to prevent water loss.
  • PLANFIX contains cement and reacts as alkaline with water, so it is classified as irritant.
  • Please consult the directions for safe use and precautions written on the packaging before use.
null

Surface: Concrete

null

Application: Trowel