PASTE SCREED FOR WALLS is a ready to use screed, formulated with special resins and inorganic pigments. It is easy to apply, mouldable and adheres well to the surface. Owing to these characteristics, the product is particularly suitable for screeding and filling operations on interior walls, cement plasters, rough plasters, prefab panels, and especially for walls deteriorated by small hairline cracks and fissures. The product has a low odour level, is non inflammable and friendly to both humans and the environment.

Ideal Use

Interior Walls.

Preparation of the surface

Thoroughly clean the surface to be screeded, removing all loose material. In case of new walls, the surface must be thoroughly dry and mature. In case of powdery, gypsum plasters apply one coat of primer NEOFIX by OIKOS diluted 50% with drinkable water.

Application method

Apply one or two coats of the product with stainless steel trowel obtaining a thickness or approx. 0,5mm.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications

Clean the surface, removing any loose material. Remove old detaching paints by scraping or using a paint stripper. In case of powdery, Gypsum plasters apply one coat of a product like the primer NEOFIX OIKOS diluted 50% with drinkable water. Apply then one or two coats of screed with a stainless steel trowel obtaining a thickness or approx 0,5mm.