Special protective designed specifically for all lime-based products. It guarantees water repellency and opacity to the product on which it is applied, it represents an absolute world novelty as it can be used after only 24 hours from the application of the finishing product. It does not alter texture or coloring, maintains excellent perspiration and prevents the formation of white spots.

Technical Qualities
SUPERFINISH24 is a special, water repellent, matt protective coating especially created for use on lime based materials. In suitable environmental conditions, the product can be applied after only 24-48 hours from the application of the lime based product, giving an ideal protection when completely dry. SUPERFINISH24 gives the products a greater surface resistance against water infiltration, enhancing the surface washability.

Ideal Use
In interiors and exteriors on absorbing and not polished lime based products such as PITTURA ALLA CALCE, INTONACO ANTICO, MARMORINO NATURALE/FINE, TRAVERTINO ROMANO.

Application Method
SUPERFINISH24 shall be applied on the product to be protected after  at least 24-48 hours from the end of application (in perfect environmental conditions). To get a uniform finish, apply the product evenly by a short hair roller, wet on wet until the surface can not absorb any more product. Considering the specific nature of lime and its sensitivity, in case of medium/intense shades, the product could bring out the shade tonality without anyway altering the typical matt aspect of lime based products. The application of an excessive  quantity can alter the matt aspect of the product on which it is applied.

Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agrrements.