ULTRASATEN is an acrylic enamel for walls. Very easy to clean and ecological, the product owns an excellent coverage and washability, it is scratch resistant and highly resistant to abrasion. It resists every stain: splashes of soft drinks, coffee, sauces, frit juice, mud as well as drawings of kitchen, children’s room. It is available in over 3000 shades and 3 gloss grades: matt, satin and gloss. The product has been put through all the test indicated by the UNI 11021:2002 regulations for “Products and systems for painting environments where there are food stuffs present”. Compliant with CAM (Minimum Environmental Criteria). III level certification. EPD. Product certified in class “A+” under emissions classifications (Decree of the Official French Gazette dated 19th April 2011).
Ideal Use
Interior walls to be decorated, subject to intense tear or dirt. Base coat for decorative products.
Surface Preparation
Clean the surface, removing any loose material. For crumbly or very absorbent substances, apply the recommended acrylic fixative CRILUX or NEOFIX by OIKOS. Wait at least 6 hours before painting. In order to increase the coverage of the cycle use as primer IL PIGMENTATO by OIKOS. In the event that the decoration requires a perfectly smooth finish, screed over the surface ffirst with STUCCO IN PASTA PER RASATURA (paste screed for walls) by OIKOS.
Application Method
Apply two coats of ULTRASATEN diluted 20 – 25% with drinkable water, leaving 4 – 6 hours between each coat. ULTRASATEN can be applied by roller, brush or spray gun. It is a self – expanding product that does not leave signs of roller or brush strokes. By adding one litre of Biamax 03base TR to four of Ultrasaten (gloss, Satin or Matt), it is possible to obtain a mix with which very particular decorative effects can be created:
Sabbiato Effect: on a smooth surface apply by brush, in an irregular manner, one coat of the ULTRASATEN/ Biamax mix, diluted 20-25% with water. After a few minutes, pass back over the surface with the brush free of product, in order to highlight and bring out further the effect. If the coverage is not sufficient, after 4 – 6 hours a second coat can be applied. The yield varies according to the quantity of product applied. Yield 9-10 mq/lt. For this finish it is also possible to obtain the Stellato effect by adding two pots of the additive Decorglitter for every litre of the mix that is created.
Le Trame Effect: on a smooth surface apply one coat of Fondo Murales. After drying, using a brush, apply one coat of the ULTRASATEN/ Biamax mix diluted 15% with water, taking care to pass over the product for the last time in a horizontal direction, immediately work over the surface by dragging the Tool for Corduroy effect (art. 133) in the same direction. In order to eliminate eventual imperfections caused by accumulations of product, before the product is dry, pass back over the surface with the Spatola Dentata (art.A01). Once dry, repeat the operation, always applying the product in a horizontal sense but working over the surface with the Tool for Corduroy effect ina vertical sense and using the Psatola dentata to remove eventual imperfections. It is essential to regularly clean excess product from the Tool for Corduroy effect in order to avoid the formation of lumps. Yield 4-5mq/lt. For this finish it is possible to obtain the Stellato effect by adding one pot of the additive Decorglitter to every litre of the mix generated. These effects can be used as the base for the application of other OIKOS decorative products thus further enlarging the range of decorative finishes that can be achieved. In these instance it is best to mix Biamax into the MATT version of ULTRASATEN.
Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national reulations in force at that time. Transportation must be carried out in accordance with international agreements.
Specifications
Thoroughly clean the surface, removing any loose material. For crumbly or very absorbent substrates, apply a sealer based on acrylic resins such as CRILUX or NEOFIX by OIKOS. In order to increase the coverage of the cycle use as a primer IL PIGMENTATO by OIKOS. Wait at least 6 hours before painting. Apply then two coats of an ecological enamel for walls such as ULTRASATEN by OIKOS, cleanable, extra washable (class1), in class A+ under emissions classification, compliant with standard UNI 11021:2002 for use in environments where there are food stuffs present.