UNICRET

UNICRET is a pre-mixed mortar, offering:

  • Stable quality
  • Simplified application on site (needs only water)
  • Very good workability
  • Very good adhesion to the substrate

It is clasified with the CE marking as GP CS II W0 mortar, according to EN 998-1 and according to EN 998-2, as a designed general purpose masonry mortar, for external use, in elements subject to structural requirements. Certificate number: 0906-CPR-02412008. UNICRET is suitable for masonry and rendering applications. It is ideal for general repair works.

Substrate preparation
The substrate must be clean, free of dust, oil, loose materials etc. and should be thoroughly dampened, before the application of UNICRET. On difficult or very smooth surfaces we may apply a spatterdash (rough cast) first, that consists of UNICRET improved with ADIPLAST latex, diluted in the mixing water at a ratio of ADIPLAST: water=1:3 by volume.

Application
UNICRET is added into water under continuous stirring, until a mixture of the required workability is formed. It is applied like ordinary render or masonry mortar.

  • Temperature during application should be at least +5 oC.
  • In hot weather, UNICRET should be moistened after application, to be protected from water loss.
  • UNICRET contains cement that reacts with water forming alkaline solutions, thus is classified as irritant. 
  • Consult the usage risks and safety advice written on the bag.
null

Surface: Concrete, cement

null

Application: Trowel